AVer SEB5116 series - Manual (Page 52)

46
3.2 Camera Setup
User can configure camera, motion mask, and PTZ camera parameters in this section.
3.2.1 Camera Setting
Click to call out virtual keyboard for entering value in necessary columns. Click OK to
save and exit the setup window, click Cancel to exit without save.
i
In Select Cameras, SEB5108H series only has 8 channels will be available.
(1)
(2)
(3)
(4)
(1) Select Camera
Select the camera number you want to configure. To select all cameras, mark Select All check box.
- Preview display: Enable/disable the previewing of selected camera on surveillance screen.
When there is no video source on the camera, we suggest disabling it so that the system
won’t detect it as video loss error.
(2) Video Adjust
Adjust the brightness, contrast, hue, and color of the camera.
(3) Camera Name
Enter the name of camera. Maximum is 10 characters.
(4) Preview screen
The selected camera video will be display in here.