AVer SEB5116 series - Manual (Page 44)

38
Part II
Click Next to go to next setup page, click Back can go back previous setup page. Click OK to
accept the new settings, click Cancel to exit without saving.
(1)
(2)
(3)
(1) Storage
Display the recorded video save path. User can format the hard disk and calculate the
approximately capacity of hard disk for recording.
- Format: To format the hard disk.
Before starting hard disk format, please stop all operations on the DVR server.
1. Click Refresh to get the current storage path list.
2. Select the storage path and click Format button.
3. When hard disk format is done, click OK to finish.
4. In System Setting window, click Refresh to re-detect the hard disk.
- Calculate: To calculate the capacity of hard disk for recording, click Calculate. And then, fill in
the hard disk capacity in Expected HD Size (GB) or enter the expected record days in Expected
Recording time (Days), and then, click Calculate to start calculation. To reset the entered value,
click Clear. The result will be shown in Total Record Time (Days) column. To exit, click OK.