AVer SEB5116 series - Manual (Page 68)

62
- FTP Setup
1. In the FTP Setting dialog box, enter the FTP Server(IP address), Port, ID and Password.
2. In Upload image when sensor is triggered option, select the camera that the images will
be capture and send when the sensor is triggered.
3. Click OK to exit and save the setting and Cancel to exit without saving the setting.
- Start Recording
Record the video from the selected camera.
1. Select the camera to enable/disable video recording. Enable All to select all cameras.
2. In the Frame Rate selection, select As Setting to record the number of frames based on
the Recording Setting or Max to record the maximum of frames based on the available
speed.
3. In the Start Recording prior text box, mark and set the number in second for the DVR
system to pre-recording before the alarm happen.
4. In the Stop Recording after text box, mark and set the number in second for the DVR
system to continue recording after the alarm has ended. If user doesn ’t mark and set the
time, the alarm recording will continue recording until alarm is reset.
i
In Select Cameras, SEB5108H series only has 8 channels will be available.