4 installing option cards, J5 j6 – Rice Lake 920i Installation Manual V3.10 User Manual

Page 18

Advertising
background image

12

920i

Installation Manual

Digital inputs and outputs are configured using the

DIG I/O menu. See Section 3.2.6 on page 47 for

configuration information.
An optional 24-channel digital I/O expansion card,

PN 67601, is available for applications requiring more

digital I/O channels.

NOTE:

Digital I/O points can be configured to count

active pulse inputs by setting them to PROGIN

(DIGIN menu) and using the

iRite

DigInSsBbActivate

handler with a timer to turn the handler on and off.

However, the fastest pulse rate that can be counted

using a digital input is 10Hz (10 pulses per second).

More demanding applications can use the pulse input

option card (PN 67603) to count pulses in the

4–4000Hz range.

2.4

Installing Option Cards

Each option card is shipped with installation

instructions specific to that card. The general

procedure for all option cards is as follows:

Option cards are not hot-pluggable.
Disconnect power to the

920i

before

installing option cards.

1. Disconnect power to the indicator. Remove

backplate as described in Section 2.2 on page 8.

2. Carefully align the large option card connector

with connector J5 or J6 on the CPU board (see

Figure 2-6). Press down to seat the option card

in the CPU board connector.

3. Use the screws provided in the option kit to

secure the other end of the option card to the

threaded standoffs on the CPU board (see

Figure 2-6).

4. Make connections to the option card as required.

Use cable ties to secure loose cables inside the

enclosure as shown in Figure 2-7. When

installation is complete, reassemble the

enclosure as described in Section 2.6 on

page 14.

Figure 2-6. Installing Option Card Onto CPU Board

Figure 2-7. Installed Option Cards, Showing Secured

Cables

The

920i

automatically recognizes all installed option

c a r d s w h e n t h e u n i t i s p o w e r e d o n . N o

hardware-specific configuration is required to identify

the newly-installed card to the system.

J5

J6

PULSE INPUT

CARD

DUAL A/D

CARD

INDICATES

OPTION CARD

CABLE TIES

CT

CT

CT

CT

CT

Wi-Port
Serial Card

Memory Card

Wireless Antenae

Advertising