Rice Lake 920i Installation Manual V3.10 - Manual (Page 68)

62 920i Installation Manual
6.3 Customizing Print Formats
The following sections describe procedures for
customizing print formats using the
iRev
configuration
utility, serial commands, or the front panel (PFORMT
menu. See Section 10.6 on page 109 for information
about custom stream formatting.
6.3.1 Using iRev
The
iRev
configuration utility provides a ticket
formatting grid with a tool bar. The grid allows you to
construct the ticket format without using the
formatting commands (<NL> and <SP>) required by
the front panel or serial command methods. Using
iRev , you can type text directly into the grid, then
select weight value fields from the tool bar and place
them where you want them to appear on the printed
ticket.
Figure 6-1 shows an example of the
iRev
print
formatting display.
Figure 6-1. iRev Print Formatting Display
6.3.2 Using the Front Panel
If you have no access to equipment for communication through a serial port or are working at a site where such
equipment cannot be used, you can use the PFORMT menu (see Figure 6-2 on page 62) to customize the print
formats.
Figure 6-2. PFORMT Menu
SCALES SERIAL FEATURE PFORMT SETPTS DIG I/O VERS
GFMT NFMT ACCFMT SPFMT TRWIN TRWOUT TRFMT
See GFMT Menus
PORT 4
PORT 1
PORT 3
PORT 2
PORT FMT
format
HDRFMT1 HDRFMT2
format format
ALERT
Default port for ALERT
format is PORT 1
SERV
Alert email
server
PHONE
Alert modem
phone
ALERT format ONLY
AUDITFMT
PORT 3
PORT 4
PORT 2
PORT 1
PORT
AUXFMT
Same as AUXFMT1
AUXFMT1 AUXFMT20
PORT 4
PORT 3
PORT FMT1
format
...
PORT 2
PORT 1