Rice Lake BCi Belt Scale - Installation and Operation Manual Version 2.03 - Manual (Page 30)

24 Installation and Operation Manual
Proximity Sensor Located on Wheel
1. The wheel speed sensor should be mounted to ride against the inside of the return conveyor belting.
2. Install the wheel bracket assembly to the tail end side of the scale carriage. The belt travel should pull the
wheel away from the scale carriage.
Speed Wheel
Sensor
Figure 2-16. Speed Wheel Sensor
3. Mount the wheel arm to the cross brace closest to the tail of the conveyor. The wheel assembly must be
free to move in the vertical direction and must maintain contact with the belt at all times.