Rice Lake BCi Belt Scale - Installation and Operation Manual Version 2.03 - Manual (Page 42)

36 Installation and Operation Manual
3.7 Replacement Parts and Assembly Drawings
Replacement parts for the BCi universal enclosure mode are listed below.
Ref Number PN Description (Quantity)
1 82854 Backplate gasket (1)
2 14862 Machine screws, 8-32NC x 3/8 phillips (4)*
3 82853 Back panel (1)
4 67491 Inspection label (1)
5 75062 Sealing washers (12)
7 15631 Cable tie, 3-in nylon (2)*
8 67614 LCD display (1)
9 67886 Standoffs, short (4)
10 68598 Protective lens (1)
11 44676 Sealing washer for setup switch access screw (1)
12 42640 Setup switch access screw, 1/4-28NF x 1/4 (1)
13 67535 Interface board cover plate gasket (1)
14 67530 Interface board connector plate (1)
15 14845 Machine screws, 6-32NC x 3/8 phillips (8)
16 15626 Cord grips, PG9 (6)
17 15628 Cord grips, 1/2 NPT (2)
18 67795 Power cord assembly, 115 VAC and 230 VAC North American units (1)
69998 Power cord assembly, 230 VAC European units (1)
19 68425 Fuse access coverplate (1)
20 68621 Fuse access coverplate gasket (1)
21 69898 Nylon spacers (2)
22 58248 Lock nuts, 6-32NC nylon (2)
23 14822 Machine screws, 4-40NC x 1/4 (11)
26 68662 Ribbon cable to interface board (1)
27 82856 Power supply bracket (1)
28 16861 High voltage warning label (1)
29 71333 Power supply, ±6VDC, 65W (1)
30 16892 Ground/Earth label (1)
31 15630 Lock nuts for 1/2 NPT cord grips (2)
32 15134 Lock washers, No. 8, Type A (3)
33 14626 Kep nuts, 8-32NC (3)*
34 15601 Ground wire, 6 in w/ No. 8 eye connector (1)
35 53308 Model/serial number label (1)
36 82852 Enclosure, deep universal (1)
37 68661 Standoffs, long (2)
38 67869 Interface board (1)
39 15627 Lock nuts for PG9 cord grips (6)
40 69290 3V Lithium coin battery
41 55708 Machine screws, 4-40NC x 3/8 phillips (2)
42 117930 CPU board (1); Board marked as 109549; sold as 117930
Table 3-7. Replacement Parts