Rice Lake CB-2 Concrete Batch Controller Version 1.0 - Manual (Page 23)

Configuration of Scale Parameters 19
The
920i
indicator can be configured using a series of menus accessed through the indicator front panel when the
indicator is in setup mode. Table 3-1 summarizes the functions of each of the main menus.
Figure 3-3. Scale 1 Configuration
3.2 Menu Structures and Parameter Descriptions
The following sections provide graphic representations of the
920i
menu structures and tables describing the
menu parameters. Default values are shown in bold type; numeric ranges and string values are shown in italic
type. Parameters shown surrounded by a dotted-line box only appear under the special circumstances explained
under each box.
Figure 3-4. Configuration Menu Flow
Menu Menu Function
SCALES Configuration Configure and calibrate scales.
SERIAL Serial Configure communications ports.
FEATURE Feature Set date and time formats, truck mode, passwords, keyboard locks, regulatory mode, and
initial consecutive number value, define softkeys and setpoint prompts.
PFORMT Print Format Set print format used for header, gross, net, truck in/out, setpoint, and auxiliary ticket formats.
SETPTS Setpoints Configure setpoints and batching mode.
DIG I/O Digital I/O Assign digital input/output functions.
ALGOUT Analog Output Configure analog output module. Used only if analog output option is installed.
VERSION Version Display installed software version number. The Reset Config softkey on the Version menu can
be used to restore all configuration parameters to their default values.
Table 3-1. 920i Menu Summary
 ".
&YJU
4DBMF

$POmHVSBUJPO





4BWF
BOE
&YJU
3%2)!, 3#!,%3 6%23
3#!,% 3#!,% #/.&)' 3#!,% #/.&)'
4$"-&4 4&3*"- '&"563& 1'03.5 4&5154 %*(
*0 "-(065 7&34
4IPXO
POMZ
JG
"OBMPH
0VUQVU
DBSE
JT
JOTUBMMFE