Rice Lake IQ Plus 355 Installation Manual V1.17 - Manual (Page 6)

2 IQ plus 355 Installation Manual
1.2 Front Panel Keypad
Figure 1-1 on page 2 shows the IQ plus 355 LED annunciators, keypad, and normal mode key functions.
The symbols shown under the keys (representing up, down, enter, left, right) describe the key functions assigned
in setup mode. In setup mode, the keys are used to navigate through menus, select digits within numeric values,
and increment/decrement values. See Section 3.1.3 on page 13 for information about using the front panel keys
in setup mode.
Figure 1-1. IQ plus 355 Front Panel, Showing LED Annunciators and Normal Mode Key Functions
1.3 LED Annunciators
The IQ plus 355 display uses a set of eight LED annunciators to provide additional information about the value
being displayed:
•
Gross
and
Net
annunciators are lit to show whether the displayed weight is a gross or net weight.
• Center of zero ( ): Gross weight is within 0.25 graduations of zero. This annunciator lights when the
scale is zeroed.
• Standstill ( ): Scale is at standstill or within the specified motion band. Some operations, including
tare functions and printing, can only be done when the standstill symbol is shown.
•
lb, kg, oz,
and
g
annunciators indicate the units associated with the displayed value: lb=pounds,
kg=kilograms, oz=ounces, g=grams.
The displayed units can also be set to short tons (tn), metric tons (t), or NONE (no units information
displayed). The
lb
and
kg
LEDs function as primary and secondary units annunciators for some
combinations of primary and secondary units. If neither primary nor secondary units are lb, kg, oz, or g, the
lb
annunciator is lit for primary units,
kg
for secondary units.
$ ) ' ) 4 ! ,
4XJUDI
CFUXFFO
QSJNBSZ
BOE
TFDPOEBSZ
VOJUT
4FOE
EBUB
UP
TFSJBM
QPSU
4FU
HSPTT XFJHIU
UP
[FSP
4XJUDI
CFUXFFO
HSPTT
BOE
OFU
XFJHIU
EJTQMBZ
"DRVJSF
UBSF
/03."-
.0%&
,&:
'6/$5*0/4
;&30 (3044
/&5
5"3& 6/*54 13*/5
5
#( 6OJUT
MC
LH
P[
H
(SPTT
/FU