Rice Lake Motorola DS457 Laser Scanner - Manual (Page 100)

7 - 6 DS457 Fixed Mount Imager Integration Guide
Decoding Illumination
Parameter # F0h 2Ah
Selecting
Enable Decoding Illumination
causes the imager to turn on illumination every image capture to aid
decoding. Select
Disable Decoding Illumination
to prevent the imager from using decoding illumination.
Enabling illumination usually results in superior images. The effectiveness of illumination decreases as the
distance to the target increases.
Decode Aiming Pattern
Parameter # F0h 32h
This parameter only applies in Decode Mode. Select
Enable Decode Aiming Pattern
to project the aiming
pattern during bar code capture, or
Disable Decode Aiming Pattern
to turn the aiming pattern off.
NOTE
Changing this parameter while using Presentation Mode, with or without Motion Enhancement, is not
recommended.
*Enable Decoding Illumination
(01h)
Disable Decoding Illumination
(00h)
NOTE
If
Picklist Mode on page 6-17
is enabled, the decode aiming pattern turns on even when disabled.
*Enable Decode Aiming Pattern
(02h)
Disable Decode Aiming Pattern
(00h)