Rice Lake Motorola DS457 Laser Scanner - Manual (Page 32)

2 - 8 DS457 Fixed Mount Imager Integration Guide
Connecting the DS457
USB Host Connection
1.
Plug the 9-pin D-connector with the end marked
SCANNER
into the DS457.
2.
If using an external switch and applicable host cable, plug the trigger cable into the female stereo
connector on the flying lead of the 9-pin D-connector. See
Figure 2-10 on page 2-10
for connector pins.
3.
Plug the host connector into the appropriate port on the host.
4.
Check all connections to ensure they are secure.
5.
Program the DS457 using the programming bar codes in this guide.
Figure 2-8 USB Connection
Trigger or Photo
Sensor (Optional)
Host Connector
Trigger Jack (Optional)
See
Figure 2-10
9-pin D-connector