Rice Lake Motorola DS457 Laser Scanner - Manual (Page 253)

Symbologies 12 - 31
Check ISBT Table
Parameter # F1h 42h
The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in
pairs. If you set
ISBT Concatenation
to
Enable
, enable
Check ISBT Table
to concatenate only those pairs
found in this table. Other types of ISBT codes are not concatenated.
ISBT Concatenation Redundancy
Parameter # DFh
If you set
ISBT Concatenation
to
Autodiscriminate,
use this parameter to set the number of times the imager
must decode an ISBT symbol before determining that there is no additional symbol.
Scan the bar code below, then scan two numeric bar codes in
Appendix D, Numeric Bar Codes
to set a value
between 2 and 20. Enter a leading zero for single digit numbers. To correct an error or change a selection,
scan
Cancel on page D-3
. The default is 10.
*
Enable Check ISBT Table
(01h)
Disable Check ISBT Table
(00h)
ISBT Concatenation Redundancy