Rts line state, Beep on <bel, Rts line state -16 – Rice Lake Motorola DS457 Laser Scanner User Manual
Page 162: Beep on <bel> -16
Advertising
9 - 16 DS457 Fixed Mount Imager Integration Guide
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select
Low RTS
or
High RTS
line state.
Beep on <BEL>
When this parameter is enabled, the imager issues a beep when it detects a <BEL> character on the serial
line. <BEL> gains a user's attention to an illegal entry or other important event.
*
Host: Low RTS
Host: High RTS
Beep On <BEL> Character
(Enable)
*
Do Not Beep On <BEL> Character
(Disable)
NOTE
A NULL character must be sent to the imager before BEL to ensure the BEL character is processed
correctly.
Advertising