Rice Lake Motorola DS457 Laser Scanner - Manual (Page 28)

2 - 4 DS457 Fixed Mount Imager Integration Guide
Mounting the Stand (optional)
You can attach the base of the stand to a flat surface using two screws or double-sided tape (not provided).
Screw Mount
1.
Position the assembled base on a flat surface.
2.
Screw one #10 wood screw into each screw-mount hole until the base of the stand is secure.
Tape Mount
1.
Peel the paper liner off one side of each piece of tape and place the sticky surface over each of the three
rectangular tape areas.
2.
Peel the paper liner off the exposed sides of each piece of tape and press the stand on a flat surface until
it is secure.
Figure 2-3 Mounting the Stand
Two screw-mount holes
Double-sided tape
areas (3 places)
(dimensions = 1” x 2”)