Wine Guardian Humidifier 50 Hz - Manual - Manual (Page 18)

16
Start-Up and Operation 启动和运行
Now that the installation is complete, it’s time to start the unit.
1) Check to make sure all connections are secure.
2) Turn on the cooling unit if so mounted.
3) Turn on the rocker switch on the top of the humidifier.
4) Test the operations by setting the humidistat above the room condition. The humidifier
should come on, the water solenoid should open, and water should flow. It may take a few
minutes for water to appear in the drain line.
5) Set the humidistat below the room condition and the humidifier should shut off.
6) Follow the manufacturer’s directions with the humidistat for troubleshooting.
现在安装完成，是启动机器的时候。
1）检查，以确保所有的连接都是牢固的。
2）如果是集成安装，启动 冷却装置。
3）打开加湿机顶部摇杆开关。
4）将湿度调节设置高于房间湿度，加湿机会启动。水电磁阀应打开，水应该流动。这可
能需要几分钟的时间直到水流出排水管。
5）将湿度调节设置降低高于房间湿度， 加湿机应关机。
6）按照湿度调节器制造商的指示做故障排除。
Humidistat 湿度调节器
警告
THE HUMIDISTAT IS USED IN A BROAD RANGE OF APPLICATIONS AND THE MANUFACTURER’S
LITERATURE CONTAINS INFORMATION THAT MAY NOT BE SPECIFIC TO YOUR WINE CELLAR
APPLICATION. REFER TO THE MANUFACTURER’S INSTRUCTIONS CONTAINED IN THE BOX WITH
THE HUMIDISTAT. WE RECOMMEND YOU FOLLOW WINE GUARDIAN’S HUMIDISTAT
INSTRUCTIONS AND SIMPLY RETAIN THE HUMIDIFSTAT MANUFACTURER’S INSTRUCTIONS IN A
FOLDER ALONG WITH THE WINE GUARDIAN OPERATION AND MAINTENANCE MANUAL FOR
FUTURE REFERENCE.
CAUTION