Wine Guardian Humidifier 50 Hz - Manual - Manual (Page 22)

20
每年 –在每月维修的基础上：
√清洁加湿机，如果需要更换加湿机分布垫 （见以下步骤）
√腐蚀或生锈检查 -清洁和油漆
√检查是否有任何松动的绝热材料，紧固件，垫片或连接口
√检查线路连接和电源线的完整性
√检查加湿机风扇和电磁水阀的运行
√检查供水管瞄准到分布托盘中间位置的两个小孔。
Cleaning the Humidifier and Replacement of Evaporative Drip Pad
清洁加湿器，蒸发滴灌垫更换
Figure 7.0
警告
BEFORE STARTING WORK, BE SURE THE POWER TO THE WINE GUARDIAN COOLING UNIT AND
HUMIDIFIER ARE TURNED OFF.
MAKE SURE THE POWER CORD IS DISCONNECTED FROM THE POWER SOURCE.
开始工作之前，应确保酒卫冷却装置及加湿机的电源供应处于关闭状态。
确保电源线从电源切开。
1) Start by disconnecting the electrical power and shutting off the water supply.
首先切 开电源和供水。
2) Remove the access panel at the back of the humidifier.
拆下在加湿机背面的检修口。
3) Remove the drip pad and its plastic holder from the unit as an assembly by grasping the top
of the holder and pulling toward you, top first. Be sure the water feed tube is clear of the top
distribution tray.
拉分布垫和塑料架是一个组合， 抓紧塑料架顶部拉向你自己，应先拆顶部。要确保分
布托盘顶部不接触滴水管。
CAUTION