Transferring documents, Transfer box settings table, Transferring documents -19 – Canon IMAGERUNNER 2010F User Manual
Page 172: Transfer box settings table -19
Transfer Box Settings Table
The transfer mode tells the machine to receive documents and then transfer them
automatically to a fax machine at your home or another work site.
To use the transfer mode, you need to register the fax number to transfer the
documents this machine receives.
The day and time for the machine to switch to transfer mode can be preset. This
feature is especially convenient for receiving important documents coming from
countries overseas, several time zones removed from your own.
You can set the following settings for the document transfer:
An asterisk (
) indicates the default setting.
01 FILE NAME
Sets up the name of the transfer box.
Up to 24 letters
Specify the number(s) of the fax machine(s)
where you want documents transferred using
Up to 200
Sets up the password that protects the settings of
the transfer box. If you open this transfer box to
view or make changes, you have to enter this
password. You also have to enter this password to
print a document received in the transfer box.
Up to seven
04 SELECT ORIG
Enables you to set the machine to receive and
transfer documents only from originator fax
machines that you designate.
05 TIME SETUP
Sets the time to turn ON and OFF the transfer
END TIME (five
times for each)
06 PRINT RX DOC.
Sets the machine to print a copy of the documents
received in the transfer box.