Canon IMAGERUNNER 2010F - Manual (Page 52)

Setting Up Speed Dialing 2-7
Speed Dialing
2
● If you want to set an access code:
❑
Press [F3] (
▼) or [F4] (▲) to highlight <01 ACCESS CODE> ➞ press [OK].
❑
Use the numeric keys to enter an access code (two to five digits)
➞ press [OK].
The display returns to the OPTIONAL SETTING menu.
NOTE
You need to set the access code to ‘USE’ first. (See “Access Code Dialing,” on p. 2-
27.)
TX TIME SETTING
Preset a time to send documents stored in memory
automatically.
TX TYPE
Designates the transactions as transmissions to a
confidential mailbox, part of a relay broadcast, or an
answer to a polling request. You can also set the ITU-T
subaddress and password for each feature.
INTERNATIONAL
If you experience transmission errors during
international sending, change the international setting
to <INTERNATIONAL 1> and try to send the document
again. If the problem persists, select <INTERNATONAL
2>. If you still encounter a transmission error, select
<INTERNATIONAL 3>.
TX SPEED
If transmission errors occur frequently while sending in
33.6 Kbps, select a slower speed: 14.4 Kbps, 9.6 Kbps,
4.8 Kbps, or 2.4 Kbps.
ECM TX
ECM (Error Correction Mode) reduces system and line
errors during sending or receiving with another fax
machine that supports ECM.
TX LINE SELECTION
If the optional Canon Super G3 FAX Expansion Kit-B1
is installed, you can set either telephone line for
outgoing fax transmissions.
SENDER NAME
Sets the sender’s name to appear on the documents
the other party receives.
Item Description
F3
F4
OK
OK
1 2 3
4 5 6
7 8 9
0
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER SYMBOLS