3 cos queues configuration, 1 tagged packet classifier mapping – CANOGA PERKINS 9145ELB NID Software Version 4.01 User Manual
Page 103
CoS Configuration
9145ELB NID Software User’s Manual
CoS Queues Configuration
93
9.3 CoS Queues Configuration
The Class of Service Queues Configuration screen allows you to choose the classification
mapping and mode for tagged and untagged packets.
•
Tagged packets are mapped by Priority Code Point (PCP) or C-VID (the C-VLAN ID).
Network ports support PCP only.
•
Untagged packets use IP Precedence, DSCP, or AF/EF modes.
From the Class of Service Configuration screen (Figure 9-3), type 3 and press Enter. The Class
of Service Queue Configuration screen (Figure 9-4) opens.
Figure 9-4 Class of Service Queue Configuration screen
9.3.1 Tagged Packet Classifier Mapping
Classifier mapping configuration applies to the ingress port. The classification mode of User
Ports indicates how frames that are received on the User Ports are distributed to the egress
queues (located on the Network Port) and vice versa.
The Tagged Packet Classifier Mapping screen allows you to assign a queue to a PCP, or (for
User Ports only) a C-VLAN ID (C-VID) value. The Mapping per CVID is discussed in chapter 10.
To configure queue mapping for tagged packets, from the Class of Service Queue Configuration
screen (Figure 9-4), type 1 and press Enter. The Tagged Packet Classifier Configuration screen
(Figure 9-5) opens.
1. To set the classification mode of the User Port, type 1 and press Enter.
2. When you are finished, press Enter. Press Esc to return to the Class of Service Queue
Configuration screen.
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-971-4-0 V04.01 10:55:13
------------------------CLASS OF SERVICE QUEUE CONFIGURATION--------------------
1) Tagged Packet Classifier Configuration
2) Untagged Packet Classifier Configuration
3) Queues configuration on User Ports
4) Queues configuration on Network Ports
5) ED Drop Profiles on User Ports
6) ED Drop Profiles on Network Ports
Select [1-6]:
------------------------------------Messages-----------------------------------