CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 53)

System Configuration 9145ELB NID Software User’s Manual
Hardware Information
43
Figure 3-26 Hardware Information screen - 2 of 6
Selecting Next or Prev will display User Ports 1 through 16, 10G-1, and 10G-2. SFPs will be
detected for the 10G ports, even if one 10G port is disabled.
To go to a particular port, type G and press Enter. You are prompted to enter a port number in the
form: U1-16, 10G1, or 10G2.
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
Model 9145ELB-B83-0 V04.01 11:27:03
----------------------------------HARDWARE INFORMATION-----------Display 2 of 6
NID Model Number 9145ELB-B83-M-0 Module Model Number 9420-302 10G
NID Hardware Rev. A1 Module Hardware Rev. A1
NID Serial Number 20111008566 Module Serial Number 20110508246
SFP Information User Port 16 NET Port 1 User Port 10G2
Model Number SFP1-2221 SFP+1-0122 SFP+1-0122
Wavelength 1310nm SM 850nm MM 850nm MM
Connector Type Duplex LC Duplex LC Duplex LC
Data Rate 1000Mbps 1000Mbps 1000Mbps
Maximum Line Length N/A 300m 300m
Maximum Loss Budget 10dB N/A N/A
MAC address 00:40:2A:00:00:06 00:40:2A:00:00:07 00:40:2A:00:00:08
Power Supply A 48V Fan Module Not Installed
Power Supply B N/A
Select [(N)ext, (P)rev, (G)oto]:
----------------------------------Messages------------------------------------