CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 66)

9145ELB NID Software User’s Manual Port Information
Link Status
56
5.1 Link Status
Link Status informs you of the current link status of the User, Network, and Management UTP
ports of the 9145ELB and provides information on User and Network Port SFP transmit (Tx) and
receive (Rx) power. This screen changes to reflect all 16 User Ports and two 10G ports.
The current active clock is shown on the Link Status screen.
From the Port Information screen (Figure 5-1), select Link Status (1) and press Enter. Press Esc
to return to the Port Information screen.
NOTE: The screen will change to reflect the 16 User Ports and two 10G ports on the device.
Figure 5-2 Link Status screen (Dual 10G Optical Ethernet Module)
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-B83-0 V04.01 01:27:03
----------------------------------LINK STATUS-----------------------------------
Port Speed/Dplx Rx dbm Tx dbm Trans Port Speed/Dplx Rx dBm Tx dBm Trans
----- ---------- ------ ------ ----- ----- ---------- ------- ------- -----
USR1 1000M/Full N/A N/A 0 USR9 1000M/Full -5.2 -6.1 2
USR2 Down N/A N/A 0 USR10 Down N/A N/A 1
USR3 Down N/A N/A 21 USR11 Down N/A N/A 17
USR4 Down N/A N/A 12 USR12 100M Auto N/A N/A 11
USR5 Down N/A N/A 0 USR13 100M/Full N/A N/A 0
USR6 Down N/A N/A 0 USR14 Down N/A N/A 0
USR7 Down N/A N/A 0 USR15 Down N/A N/A 0
USR8 Down N/A N/A 0 USR16 Down N/A N/A 0
10G1 Down N/A N/A 0 MGMT Down N/A N/A 0
10G2 Down N/A N/A 0
Select [(CTRL-R) Reset Link State Transition Counters]:
------------------------------------Messages---------------------------------------------