Preface – CANOGA PERKINS 9145ELB NID Software Version 4.01 User Manual
Page 9
9145ELB NID Software User’s Manual
vii
Preface
About this Manual
This manual provides instructions on the configuration and operation of the 9145ELB Network
Interface Device (NID) Version 4.01 software. The 9145ELB NID can be managed using the EIA-
232 serial port through a VT100 terminal emulation program, through an Ethernet connection
using Telnet, or by using SNMP.
How this Manual is Organized
This document contains both information and procedures organized in roughly chronological
order. Starting from an introduction to the 9145ELB software, it continues with system
requirements, initial implementation, and ongoing operation.
The document includes the following chapters:
•
Chapter 1, Introduction
provides basic information about the software and navigation.
•
Chapter 2, Getting Started
describes how to set up and get started using the 9145ELB.
•
Chapter 3, System Configuration
describes how to configure the 9145ELB management
features.
•
Chapter 4, Diagnostics
describes how to configure and perform routine network diagnos-
tics.
•
Chapter 5, Port Information
describes the User Port, Network Ports, and the Manage-
ment UTP port.
•
Chapter 6, System Alarms & Logs
describes how to configure System Alarms and Sys-
tem Logs.
•
Chapter 7, Utilities
describes system utilities.
•
Chapter 8, Software Upgrade
describes how to upgrade the NID software.
•
Chapter 9, CoS Configuration
describes how to enable or disable Class of Service sup-
port that includes classification, queuing, scheduling and queue management functions
for the 9145ELB.
•
Chapter 10, Configuring EVC
describes Ethernet Virtual Connection (EVC) functionality
and the entities required for its configuration.