CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 122)

9145ELB NID Software User’s Manual Configuring EVC
EVC Configuration
112
10.2.3 Modify an EVC record
1. On the EVC Record List screen (Figure 10-3), type E and press Enter. The current record
is highlighted.
2. Press the Space bar to scroll through the list and highlight the record to modify. When the
record you want to modify is highlighted, press Enter. The Modify EVC Configuration
Record screen (Figure 10-5 or Figure 10-6, depending on your configuration) opens.
Figure 10-5 Modify EVC Configuration Record screen (Service MUX)
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-971-4-0 V04.01 10:55:13
-----------------------MODIFY EVC CONFIGURATION RECORD--------------------------
SS-VLAN ID: 1 (88A8) TTag: Disabled 0 (8100)
User Interface: USR1
Network Interface: NET1
Name: u1
Multiplexing type: Service Mux
Operational state: DOWN
1) Administrative state: UP
2) Statistics: Disabled
3) S-Tag PCP Value: Copy from ingress 4) Static/Default PCP Value: 1
5) T-Tag PCP Value: Copy from ingress 6) Static/Default PCP Value: 0
7) CoS Classification Mode: PCP 8) CoS to Queue Mapping
9) Assign Policer Profile
10) CVID to S-Tag PCP Mapping 11) CVID to T-Tag PCP Mapping
12) P-Bit Translation 13) C-VLAN Translation
14) View/modify C-VLAN List
(# of VLANs: 0)
Select [1-14] for attributes:
------------------------------------Messages-----------------------------------