CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 130)

9145ELB NID Software User’s Manual Configuring EVC
EVC Configuration
120
• Enter a C-VLAN ID (C-VID) and press Enter. The screen displays a page of 40 C-
VIDs, including the C-VID you selected.
4. To return to the Tagged Packet Classifier Configuration screen, press Esc.
Figure 10-13 User Port Tagged Packet Classifier Mapping (C-VID Mode) screen
10.2.4 Display EVC Statistics
EVC statistics can be displayed in both raw and current mode. Press CTRL-T to toggle between
the two modes.
1. On the EVC Record List screen (Figure 10-2), type S and press Enter. The current EVC
Record is highlighted.
2. Press the Space bar to scroll through the list and highlight the record for which you want
to display statistics.
3. Press Enter to select a highlighted record. The EVC Record Statistics (Current) screen
(Figure 10-14) opens.
4. To view raw statistics (Figure 10-15), press CTRL-T.
5. To reset all counters, type R and press Enter.
6. Press Esc to return to the EVC Record List screen.
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-971-4-0 V04.01 10:55:13
----------- USER PORT TAGGED PACKET CLASSIFIER MAPPING (C-VID MODE) ------------
1) Port: USR1 Page 1 of 103 Total 4094 entries
C-VID <=> Queue C-VID <=> Queue C-VID <=> Queue C-VID <=> Queue
--------------- --------------- --------------- ---------------
(PTAG)<=> Q2
1 <=> Q3 11 <=> Q3 21 <=> Q3 31 <=> Q3
2 <=> Q3 12 <=> Q3 22 <=> Q3 32 <=> Q3
3 <=> Q3 13 <=> Q3 23 <=> Q3 33 <=> Q3
4 <=> Q3 14 <=> Q3 24 <=> Q3 34 <=> Q3
5 <=> Q3 15 <=> Q3 25 <=> Q3 35 <=> Q3
6 <=> Q3 16 <=> Q3 26 <=> Q3 36 <=> Q3
7 <=> Q3 17 <=> Q3 27 <=> Q3 37 <=> Q3
8 <=> Q3 18 <=> Q3 28 <=> Q3 38 <=> Q3
9 <=> Q3 19 <=> Q3 29 <=> Q3 39 <=> Q3
10 <=> Q3 20 <=> Q3 30 <=> Q3 40 <=> Q3
2) Modify assignment
3) Go to C-VID
Select [1-3]:
CTRL-D: page down, CTRL-U: page up
------------------------------------Messages-----------------------------------