Document Outline

• IMPORTANT SAFETY INSTRUCTIONS
  • FCC INFORMATION (for US customers)
  • CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
    • WARNING
    • FOR CANADIAN CUSTOWIERS
    • IMPORTANT
    • We Want You Listening For A Lifetime
      • Ill
  • CONTENTS
  • FEATURES
    • Built-in 6-channel power amplifier
  • GETTING STARTED
    • 1 Take off the battery compartment cover.
    • 2 Insert the two supplied batteries
    • 3 Snap the battery compartment cover back into piace.
  • CONTROLS ÄND FUNCTIONS
    • © STANDBY/ON
    • © Front panel display
    • © PRESET/TUNING, EDIT
    • © FM/AM
    • © A/B/C/D/E, NEXT
    • © PRESET/TUNING/CH <1 / >, LEVEL +/-
    • (8) MEMORY (MAN’UAUTO FM)
    • ® TUNING MODE (AUTO/MAN’L)
    • iio) VIDEO AUX jacks
    • (11) VOLUME
    • (g; BASS/TREBLE+/-
    • @ PROGRAM O/>
    • ig INPUT MODE
    • INPUT selector
    • @ MULTI CH INPUT
    • i@ n PHONES (SILENT CINEMA) jack
    • igl SPEAKERS A/B
    • STRAIGHT (EFFECT)
    • ijS) TONE CONTROL
    • 0 Infrared window
    • @ CODE SET
    • 0 Input selector buttons
    • 0 Sound field program selector buttons
    • 0 SPEAKERS
    • 0 ENHANCER
    • 0 LEVEL
    • jo; TRANSMIT indicator
    • ji) STANDBY
    • j|) POWER
    • SLEEP
    • (14) MULTI CH IN
    • ® VOLUME +/-
    • ® Component selector switch
    • AMP
    • SOURCE
    • TV
    • ® STRAIGHT (EFFECT)
    • ® NIGHT
    • ® SET MENU
    • ® DISPLAY
    • (i) Numeric buttons
    • 0 Decoder indicators
    • 0 ENHANCER indicator
    • 0 Sound field indicators
    • 0 VIRTUAL indicator
    • 0 Input source indicators
    • 0 DOCK indicator
    • 0 SILENT CINEMA indicator
    • 0 CINEMA DSP indicator
    • 0 AUTC indicator
    • 0 TUNED indicator
    • 0 STEREC indicator
    • 0 MEMCRY indicator
    • (1^ VOLUME level Indicator
    • PCM indicator
    • (g) STANDARD indicator
    • )|) SP A B indicators
    • (g) Headphones indicator
    • (g) NIGHT indicator
    • (i|) HiFI DSP indicator
    • @1 Multi-information display
    • (21) SLEEP indicator
    • (g) MUTE indicator
    • g 96/24 indicator
    • g Input channel indicators
    • g) LFE indicator
    • ® Video component jacks
    • (2) Audio component jacks
    • ® MULTi CH INPUT jacks
    • ® DIGITAL OUTPUT jack
    • (6) DIGITAL INPUT jacks
    • (8) DOCK terminal
    • ® COMPONENT VIDEO jacks
    • (jcf Antenna terminals
    • (11) Speaker terminals
    • (iD AC OUTLET(S)
  • CONNECTIONS
    • Front left and right speakers (FL and FR)
    • FRONT terminals
    • CENTER terminals
    • SURROUND terminals
    • SURROUND BACK terminals
    • Audio jacks and cable plugs
    • Video Jacks and cable plugs
    • AUDIO jacks
    • DIGITAL AUDIO COAXIAL jacks
    • DIGITAL AUDIO OPTICAL jacks
    • VIDEO jacks
    • S VIDEO jacks
    • COMPONENT VIDEO jacks
    • PORTABLE jack
    • Do not connect this unit or other components to the AC power suppiy untii aii connections between components are complete.
    • Do not connect this unit or other components to the AC power supply until all connections between components are complete.
    • Do not connect this unit or other components to the AC power suppiy until all connections between components are complete.
    • Be sure to turn off the volume of this unit and other components before making connections.
    • Press and hold the tab of the AM ANT terminal.
    • Insert one of the AM loop antenna lead wires into the AM ANT terminal.
    • Release the tab of the AM ANT terminal back into place.
    • Repeat steps 2 through 4 to connect the other lead wire to the GND terminal.
    • Memory back-up
  • BASIC SETUP
    • 4 Press ENTER to enter “BASIC SETUP”.
    • 1 Set the component selector switch to AMP.
    • 2 Press SET MENU to enter “SET MENU”.
    • 3 Press /\ / sy to select “BASIC SETUP”
    • Press /\ / NA to select “ROOM” and then < / > to select the desired setting.
    • 6 Press N/ to select “SUBWOOFER” and then < / > to select the desired setting.
    • 8 Press V- to select “SETUP” and then < / > to select the desired setting.
    • 9 Press ENTER to confirm your selection.
    • 10 Press < / > to select the desired setting.
    • 12 Press /\ / V" to select a speaker and then < / > to adjust the balance.
    • 11 Press ENTER to confirm your selection.
    • 13 Press SET MENU to exit from “BASIC SETUP”.
  • PLAYBACK
  • USING AUDIO FEATURES
    • 1 Rotate the INPUT selector on the front panel to select the desired input source.
    • start playback on the selected source component or select a broadcast station.
    • Press < / > on the remote control to adjust the speaker output level.
    • Press ENTER on the remote control when you have completed your adjustment.
    • 2 Press < / > on the remote control to select the desired effect level.
  • USING VIDEO FEATURES
    • 1 Set the component selector switch to AMP and then press SET MENU on the remote control.
    • 2 Press V repeatedly to select “SIGNAL INFO” and then press ENTER.
    • Signal format l-uf<MflT
    • Sampling frequency Sl lilFLIHi::!
    • Channel (iiHijr-ihllEL
    • Bit rate l:::!l3"|2M"rE;
    • 3 Press SET MENU on the remote control again to exit from “SET MENU”.
    • 1 Turn on the video monitor connected to this unit.
    • Full display
  • ENJOYING SURROUND SOUND
    • Press < / > repeatedly to select a decoder while “PLIIxMusic” (etc.) is displayed.
    • Decoders
    • 2 Press SELECT on the remote control repeatedly to select the desired decoder.
  • RECORDING
    • (U.S.A. model) -| g|j connected components.
    • 3 start playback on the selected source component or select a broadcast station.
    • 4 Start recording on the recording component.
  • FM/AM TUNING
    • Press PRESET/TUNING/CH <3 /> once to begin automatic tuning. * •
    • 1 Rotate the INPUT selector to select “TUNER” as the input source.
    • 2 Press FM/AM to select the reception band,
    • Press PRESET/TUNING/CH <t / > to tune into the desired station manually.
    • 1
      • 1 Rotate the INPUT selector to select “TUNER” as the input source.
      • Press and hold MEMORY (MAN’L/AUTO FM) for more than 3 seconds.
      • 2 Press FM/AM to select “FM” as the reception band.
      • 1 Tune into a station automatically or manually.
      • 2 Press MEMORY (MAN’L/AUTO FM).
      • Press MEMORY (MAN’L/AUTO FM) while the MEMORY indicator is flashing.
      • Repeat steps 1 through 5 to store other
      • 1 Select preset station “E1” using A/B/C/D/E and PRESET/TUNING/CH <d/t>.
      • 2 Press and hold EDIT for more than 3 seconds.
      • 3 Select preset station “A5” using A/B/C/D/E and PRESET/TUNING/CH </!>.
      • 4 Press EDIT again.
  • XM® SATELLITE RADIO TUNING
    • (D SEARCH WIODE
    • (2) CATEGORY
    • ® PRESET/TUNING/CH </>
    • (4) MEMORY (iWAN’IJAUTO FM)
    • 0 XM
    • i2) Numeric buttons
    • 0 XM MEMORY
    • (6) SRCH MODE
    • © DISPLAY
    • 2 Search for a channel by using one of the XM Satellite Radio search modes.
    • 2 Press MEMORY on the front panel (or XM MEMORY on the remote control).
    • When the channel category is displayed:
    • Press DISPLAY on the front panel or on the remote control.
    • When the artist name / song title is displayed:
  • SOUND FIELD PROGRAMS
    • Reverberations
    • Press PROGRAWf <1 / > on the front panel repeatedly.
    • 2 Turn on the video monitor and then press DISPLAY on the remote control.
    • 1 Set the component selector switch to AMP.
  • SET MENU
    • i
    • 2 Press /\ / V- to select “MANUAL SETUP”
    • 3 Press ENTER to enter “MANUAL SETUP”.
    • 1 Set the component selector switch to AMP and then press SET MENU to enter “SET MENU”.
    • 4 Press / V- repeatedly and then press
    • ENTER to select and enter the desired menu.
    • 7 Press SET MENU to exit from “SET MENU’
    • Surround back speakers
    • Crossover i;:FiC!SS OyiER
    • Speaker distances
    • For OPTICAL INPUT jacks 2, 3 and 4
    • Repeat steps 1 through 3 to rename each input source.
    • Press SET MENU on the remote control to exit from “INPUT RENAME”.
    • Video conversion UIDIEO CONU::
    • Speaker B setting i:>F' B
  • ADVANCED SETUP
    • 1 Press STANDBY/ON on the front panel to set this unit to the standby mode.
  • REMOTE CONTROL FEATURES
    • 2 Press CODE SET using a ballpoint pen or a similar object.
    • 1 Press TUNER to select “TUNER” as the input
    • source.
    • 1 Press CODE SET using a ballpoint pen or a similar object.
    • 2 Press CODE SET using a ballpoint pen or a similar object.
    • Press the numeric buttons to enter the code number “00001” or “00002”.
    • Press the numeric buttons to enter the code number “81916” or “81917”.
    • 1 Press XM to select “XM” as the input source.
    • 2 Press CODE SET using a ballpoint pen or a similar object.
    • 1 Press CODE SET using a ballpoint pen or a similar object.
    • Press the numeric buttons to enter the code number “81918” or “81919”.
    • Press the numeric buttons to enter the code number “9981”.
  • USING iPod®
    • 1 Press V-AUX on the remote control to select “V-AUX” as the input source.
    • Press CODE SET on the remote control using a ball point pen or a similar object.
    • ;o:::
      • Press the numeric buttons to enter the code number “81981”.
      • 1 Press DISPLAY on the remote control.
      • Press /\ / v on the remote control to select the desired menu and then press ENTER to enter the selected menu.
      • Repeat ICepfjai:..
  • RESETTING THE SYSTEM
    • 1 Press STANDBY/ON on the front panel to set this unit to the standby mode.
    • 3 Press PROGRAM <3 /1> on the front panel repeatedly to select “PRESET”.
    • 4 Press STRAIGHT (EFFECT) on the front panel repeatedly to select “RESET”.
  • GLOSSARY
  • SPECIFICATIONS
    • AUDIO SECTION
    • VIDEO SECTION
    • FM SECTION
    • AM SECTION
    • GENERAL
    • LIST OF REMOTE CONTROL CODES
      • CABLE TV RECEIVER
      • OTHER VIDEO ACCESSORIES
      • OTHER AUDIO ACCESSORIES