Cannon Instrument miniAV-X - Manual (Page 17)

11
CANNON ® miniAV-X Automatic Viscometer with VISCPRO ® Instruction & Operation Manual
Version 1.0b— March, 2012; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
You will use the Instrument Settings window (see below) to describe
and control miniAV-X instrument operational features. These settings
affect the instrument as a whole. Check the instrument settings for your
instrument per the instructions below, and make any necessary changes:
The Instrument Settings window
Use the ID field to input instrument identification information using up to
16 alphanumeric characters.
The S/N : field (non-editable) indicates the serial number from the label
on the miniAV-X rear service panel.
Prompt options The Prompt for Check Standards options permit you to set a computer-
ized “alarm clock” which will pop up a message reminder to run a check
standard based on the schedule you set with the control. Notice that you
can specify a reminder after “x” number of days and/or “x” number of
samples. Click the check box(es) to enable/disable each reminder.
When you have verified all settings, click OK.