Cannon Instrument miniAV-X - Manual (Page 93)

87
CANNON ® miniAV-X Automatic Viscometer with VISCPRO ® Instruction & Operation Manual
Version 1.0b— March, 2012; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
Using the date filter
Use the date filter to select date/time parameters for the analysis. To use
the date filter, click the
Date Filter tab from the analysis configuration
window.
To define a Fixed Date and Time , click the corresponding radio button
. Then use the spin controls and/or list box selection options to set
the appropriate date/time parameters. All samples tested after the start
date/time and before the end date/time, inclusive, will be included.
To automatically update the report with sample data as tests are com-
pleted, click the
Use Dynamic Update radio button. Click the Do not
show previous samples box if you do not wish to display samples run
prior to the time the analysis is opened.
Use the spin controls to select the Sample Time Window (the desired
range of recent samples to be included in the analysis). Data from
samples tested within [x] hours will be displayed in the analysis. Note
that the analysis sorting options are disabled if you are using
Dynamic
Update .
EXAMPLE If the Do not show previous samples box was unchecked and a Sample
Time Window value of 5 hours was selected, the analysis (when opened)
would display data for all samples tested within the last five hours.