ChemoMetec SP-100 - Manual (Page 65)

10 EMC and EMI safety standards
47
10 EMC and EMI safety standards
The NucleoCounter SP-100 complies with EMC/EMI safety standards as follows.
EN61326: 1997+A1: 1998 (Class B) +A2: 2000, Electrical equipment for measurement,
control and laboratory use – EMC requirements (emission and immunity). Annex B and C
from A1: 1998 is used.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The NucleoCounter SP-100 complies with the following Safety standards:
UL 3111-1 (UL61010A-1): Electrical Equipment for Measurement, Control and Laboratory
use.
IEC/EN61010-1: Electrical Equipment For Laboratory use.
CAN/CSA-C22.2 No. 1010.1-92: Electrical Equipment for Measurement, Control and
Laboratory use.