2 hardware installation, 1 install hard drive &dvd writer, 1 install hard drive – COP-USA NVR2816NE-L User Manual
Page 10
NVR User Manual
4
2 Hardware Installation
Notice: Check the unit and the accessories after getting the NVR.
Please don‟t power up the unit till the physical installation is complete.
2.1 Install Hard Drive &DVD Writer
2.1.1 Install Hard Drive
Notice: 1. This series supports two SATA hard drives. Please use the hard drive the manufacturers recommend specially for
security and safe field.
2. Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate Recording
Capacity”.
Step1: Unscrew and Open the top cover.
Step2: Connect the power and data cables. Place the HDD onto the bottom case as Fig 2-1.
Step3: Screw the HDD as Fig 2-2.
Note: Please connect the power and data cables firstly, and then screw to fix.
Fig 2-1 Connect HDD Fig 2-2 Screw HDD