COP-USA NVR2816NE-L - Manual (Page 39)

NVR User Manual
33
5.6.2 Email
Step 1: Enter into MenuSetupNetworkEmail tab. Refer to Fig 5-28:
SMTP Server/Port: The name and port number of SMTP server. Check
the SSL checkbox if the server requires a secure connection (SSL); user can
setup mail servers (such as Gmail) as required.
Send address/password: Sender‟s email address/password
Receive address: Receiver‟s email address. Here user can add at least
three mail addresses. Click TEST button to test the validity of the mailbox.
Attaching image: After selecting it, the system will attach images when
sending the emails.
5.6.3 Other Settings
If your NVR is setup to use PPPoE as its default network connection, you
may setup DDNS to be used in connection. The setting steps are as follows:
Fig 5-28 Network Configuration-Email
Step 1: Select Other Settings tab. Enable DDNS server.
Step2: Select DDNS server.
Step 3: Input user name, password and host domain name registered in the
DNS website (See the following example).
Step 4: Click TEST to test the effectiveness of the relevant information.
Step 5: Click “Apply” button to save the settings.
Note: The domain name server that selected by user is a banding domain name
of NVR. User should logon the website which provided by the server supplier to
register a user name and password firstly, and then apply for a domain name on
line.
Once applied, user can access the server from the IE client by using that
domain name.
Fig 5-29 Other Settings