COP-USA NVR2816NE-L - Manual (Page 25)

NVR User Manual
19
Fig 5-2 System Setup
5.1 Basic configuration
Basic configuration includes three sub menus: system, date & time and DST.
5.1.1 System
Step1: Enter into MenuSetupBasicSystem. Refer to Fig 5-3:
Step2: In this interface you can setup the device name, device ID, video format, max
network user, VGA resolution and language. The definitions for every parameters
display as below:
Device Name: The name of the device as it may display on the client end or on CMS,
this would help the user to recognize the device remotely.
Device ID: This ID is used to map the NVR with IR remote controller and speed
dome cameras.
Video Format: Two modes: PAL and NTSC. User can select the video format
according to the cameras being used.
Fig 5-3 Basic Configuration-Basic
Password Check: If enabled the user would need to input the user name and the password for performing corresponding
operations.