COP-USA NVR2816NE-L User Manual

Page 55

Advertising
background image

NVR User Manual

49

Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the NVR‟s Main MenuSetupNetwork
interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment
should be the same as the PC. If using DHCP, please enable DHCP in the NVR and router.
Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input
http://192.168.1.100:81(here 192.168.1.100 is LAN IP of NVR, 81 is the http port of NVR). Click “

”button, the browser will

download Active X control as shown below:

Step 5: Click

icon and then select the Active X control, the welcome interface will be shown. Click “Continue””Install”

Advertising