COP-USA NVR2816NE-L - Manual (Page 22)

NVR User Manual
16
4 Add IP Cameras
This chapter mainly introduce how to connect multiple IP cameras through NVR. Once you finish adding IP cameras, you can see
the live images through the monitor of NVR.
To add IP cameras:
Step 1: Please Enter into MenuIP Camera tab. Refer to Fig 4-1. Click “Search” button to search the devices in the same
network.
Fig 4-1 Device Management Fig 4-2 Search Devices
Step 2: Enter into the search tab. Click “Refresh” to refresh the searched devices and then check the device you want to add or
check “All” to add all devices.
Step 3: Click “OK” button to save these devices.
Step 4: Click “Setup” button to enable this device. Refer to Fig 4-3. Check the “enable” checkbox, select channel and input the
username and password of this device. Then click “OK” to save settings.
Of course, you can add devices manually. The steps are as follows: Click “Add” button in the device management tab. This will
bring up a window similar to Fig 4-3. You need to check “Enable” box, select channel, manufacturer and product model and
input server port, username and password of this device. All of these information you can check in the relevant user manual.