COP-USA NVR2816NE-L - Manual (Page 24)

NVR User Manual
18
5 Main Menu Setup Guide
Click right mouse or press ESC button on the front pane to display the main menu toolbar on the bottom of the screen. Refer to Fig
5-1:
Fig 5-1 Main Menu Toolbar
Click the icon beside the screen mode to display a channel select dialog. 6/8/13 screen mode can realize single channel big
screen. Images can drag to any place to display in the live interface.
Dwell: Dwell means to display live images from different cameras in a sequence. The images may be displayed as a single
channel or in a grid fashion from different cameras. Dwell mode is enabled only when the chosen display mode is not able to
display all the available cameras.
Color: If this button is enabled, you can adjust the color of live images.
Zoom: Single channel large screen electronic amplification.
Volume: Enable sound.
PTZ: Click the PTZ button to control rotation position, speed and auto scan of the PTZ connected to the IP camera.
Record: Click this button to start/stop recording.
Playback: Click this button to playback the recorded files.
You can click button and drag it anywhere with the left mouse to move the main menu bar anywhere.
Click Menu button to pop up a window as Fig 5-2; you can also press MENU button on the front panel or operate with
remote controller to display the main menu. Clicking Setup icon will pop-up the configuration menu: