COP-USA NVR2816NE-L - Manual (Page 28)

NVR User Manual
22
5.2.2 Main Monitor
Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig
5-8:
Step2: Select split mode: 1Ч 1
、2Ч 2、2Ч 3、3Ч 3、4Ч 4 and channel. Click
button to setup the previous channel group. Click button to
set the latter channel group.
Step3: Set the dwell time.
Step4: Click “Default” to restore default setting; click “Apply” to save
the setting; click “Exit” to exit the current tab.
Fig 5-8 Live Configuration – Main Monitor
5.2.3 Mask
You can setup private mask area on the live image picture. For a given channel a maximum of three areas can be masked.
Setup mask area: Click Setting button, enter into live image to press left mouse and drag mouse to set mask area. Please refer
to the below picture. Right click to exit. Click Apply button to save the setting.
Delete mask area: Select a certain mask area and double click to delete that mask area. Then click Apply button to save the
setting.
Fig 5-9 Live Configuration-Mask Setup Mask Area Live Image Mask Area