Hardy HI 1769-2WS - Manual (Page 10)

HI 1769-WS/HI 1769-2WS WEIGH SCALE MODULE
1-2
NOTE: Hardy Process Solutions bases all procedures with the
assumption that the user has an adequate understand-
ing of Allen-Bradley ControlLogix
®
. In addition the
user should understand process control and be able to
interpret ladder logic instructions necessary to gener-
ate the electronic signals that control your applica-
tion(s).
About Hardy Manuals Every Hardy Installation and Operation manual is
organized into easily referenced chapters, that are
almost always the same:
•
Chapter 1 - Provides an introduction to the
instrument and an Overview of the equipment
and its capabilities.
• Chapter 2 - Provides a complete list of Specifi-
cations.
• Chapter 3 - Contains complete instructions
needed to install the HI 1769-WS (both standard
and optional equipment) and the Remote Termi-
nation Assembly (-RTA)
• Chapter 4 - Provides complete hardware Con-
figuration instructions for setting dip switches
and jumpers.
• Chapter 5 - Provides all Calibration instruc-
tions.
• Chapter 6 - Pertains to the Troubleshooting
procedures for repair of the instrument.
Hardy hopes that this manual meets your needs for
information and operation. All corrections or sugges-
tions for improvements of this manual are welcome
and can be sent to the Technical Publications Depart-
ment or Customer Support Department at Hardy Pro-
cess Solutions Inc.
Description The HI 1769-WS & HI 1769-2WS Weigh Scale Mod-
ules are self-contained, microprocessor-based Con-
trolLogix I/O modules with control inputs and
outputs, that is designed to be easily plugged into an
Allen-Bradley CompactLogix or MicroLogix 1500
programmable controller The HI 1769-WS Weigh
Scale Module is a single channel module while the
HI 1769-2WS is configured for dual operation which