Hardy HI 1769-2WS User Manual
Page 45
Chapter 4 - Setup
4-11
•
#define ERRORADCONVERT 0x0001
•
#define ERRORADFAILURE 0x0002
•
#define STATUSINMOTION 0x0040
•
#define ERRORNOCAL 0x0080
•
#define ERROREEPROMWRITE 0x0100
// an error occurred when writing to non-
volatile memory
•
#define NVRDEFAULTED 0x0200 // set
if SETDEFAULTPARAMS command was
given
•
#define STATUSCHANENABLED
0x8000 // set if channel is enabled
Name
Description
Default
ChanActive
16 bit integer, set to 1 if the
channel is active, 0 if not
active
1
Metric
16 bit integer which
determines the format of
weight values. Metric is the
sum of 3 fields:
1
If bit 7 is set (0x80),
weight is displayed in
Kilograms
2 If bit 6 is set (0x40),
weight is displayed as a
floating point
3. If bit 6 is not set, Weight
is displayed as an
integer, with the 3 least
significant bits giving the
number of decimal
places
0 (weight in pounds, integer
format, 0 decimal places)
WAVERSAVER
16 bit integer
0 No WAVERSAVER
1
4 Hertz
2
2 Hertz
3
1 Hertz
4
0.5 Hertz
5
0.25 Hertz
3 (1 Hertz)
TABLE 4-1: PARAMETERS