Hardy HI 1769-2WS - Manual (Page 9)

Chapter 1 - Overview
1-1
CHAPTER 1 - OVERVIEW
A BRIEF
DESCRIPTION OF
CHAPTER 1 This manual provides the user and service personnel
with a description of the specifications, installation,
setup, configuration, operation, communication,
maintenance, and troubleshooting procedures for the
Hardy HI 1769-WS & HI 1769-2WS Compact and
Micro Logix I/O Weigh Scale Modules that mount on
the Allen-Bradley
®
CompactLogix™ and
MicroLogix™ 1500 platform. The HI 1769-WS & HI
1769-2WS are equipped with WAVERSAVER
®
, C2
®
Calibration, and I NTEGRATED T ECHNICIAN
®
(IT) diag-
nostics. The module is configurable via ladder logic.
The HI 1769-WS & HI 1769-2WS modules mechani-
cally lock together by means of a tongue-and-grove
design and have an integrated communication bus that
is connected from module to module by a moveable
bus connector. To get the maximum service life from
this product, users should operate this module in
accordance with recommended practices either
implied or expressed in this manual. Before using the
Weigh Scale Module, all users and maintenance per-
sonnel should read and understand all cautions, warn-
ings, and safety procedures, either referenced or
explicitly stated in this manual, to ensure the safe
operation of the module. Hardy Process Solutions
appreciates your business. Should you not understand
any information in this manual or experience any
problems with the product, please contact our Cus-
tomer Support Department at:
Phone: (858) 278-2900
FAX: (858) 278-6700
e-mail: [email protected]
Web Address: www.hardysolutions.com
NOTE: WAVERSAVER
®
, C2
®
, IT
®
are registered trademarks
of Hardy Process Solutions Inc. Integrated Technician
is a trademark of Hardy Process Solutions Inc.

Allen-Bradley
®
, CompactLogix ™ and MicroLogix™
1500 are trademarks of the Rockwell Corporation.