Hardy HI 1769-2WS - Manual (Page 57)

Chapter 4 - Setup
4-23
WEIGHSYSTEST
0x6D
Perform an INTEGRATED
TECHNICIAN test. O:0=0x6D
O:1 = number of sensors
O:2-15 (unused) I:0 = 0x6D
I:1 = number of sensors
I:2-15 are weight values,
scaled according to the
Metric Parameter value
I:2 = combined gross weight,
LSW
I:3 = combined gross weight,
MSW
I:4 = gross weight on load
sensor #1, LSW
I:5 = gross weight on load
sensor #1, MSW
I:6 = gross weight on load
sensor #2, LSW
I:7 = gross weight on load
sensor #2, MSW
I:8 = gross weight on load
sensor #3, LSW
I:9 = gross weight on load
sensor #3, MSW
I:10 = gross weight on load
sensor #4, LSW
I:11 = gross weight on load
sensor #4, MSW
I:12 = Internal reference
weight, LSW
I:13 = Internal reference
weight, MSW
I:14 = JBOX reference
weight, LSW
I:15 = JBOS reference
weight, MSW
C2SEARCH
0x6E
Search for C2 load sensors.
The COMMAND STATUS is
the number of sensors found. O:0=0x6E
O:1-15 (unused) I:0 = 0x6E
I:1 = COMMAND STATUS
I:2-I:15 See NOCMD,
continuously updating
WEIGHSYSRESULTS
0x6F
Report the results of a previous
INTEGRATED
TECHNICIAN test. No new
test is performed. O:0=0x6F
O:1-15 (unused) I:0=6F
I:1-15 See WEIGHSYSTEST