Hardy HI 1756-2WS - Manual (Page 32)

HI 1756-WS WEIGH SCALE MODULE
4-4
Configuration
Parameters for the HI
1765-WS Module With version 2.3 software, the HI 1765-WS module
can recieve 32 words of the configuration data from a
PLC upon power-up. These data are used only if the
value for Config_rev_num is set to 1 and the parame-
ters are sent in the correct format and range.
NOTE: DINT Parameters can be interpreted as floating point
based on the value of a bit within the DecimalPoints
parameter of the channel.
Parameter
Offset (In
Words)
Single Channel
Config_rev_num0 * 0
ChanEnabled0 1
DecimalPoints0 ** 2
Metric0 3
NumAverages0 4
Waversaver0 5
SpanWeight0 6
CalLowWeight0 7
ZeroTrackEnables0 8
AutoZeroTolerance0 9
MotionTolerance0 10
TareWeight0 11
EnableButton0 12
RocTimeBased0 13
ZeroTolerance0 14
Spare1_0 15