Hardy HI 2151/30WC Single-Scale Controller - Manual (Page 12)

HI 2151 Series Weight Controller
Profibus Interface Option
6
B. Panel Mount, Remote, and Blind Installations.
Remove the four Phillips head machine screws that fasten the chassis to
the HI 2151 Series WC cover.
Figure 2-2
3. Pull the chassis completely out of the cover.
4. Place the chassis on an anti-static pad.
5. Put on an anti-static wristlet and connect it to the anti-static pad.
6. Analog to Digital PCB is clearly visible and there are eight standoffs mounted on the
board. (See Fig. 2-2)
7. Remove the PROFIBUS Interface Card from the anti-static bag.