Hardy HI 2151/30WC Single-Scale Controller - Manual (Page 41)

Section 5: Block Writes
35
Block Write Command Number 85: Integrated Technician
Byte Definitions Byte Pos. #
Words
Start Word # Bytes Start Byte
Block Write Number 85 (Hex 55)
WAVERSAVER (1-5)
Excitation Monitor
0 = OFF 1 = ON
Enter Block number (only one) or Selectable
parameter
Reserved for future use
MSB
LSB
MSM
1
1 0
1 2
1 0
1
Block Write Command Number 83: Personalized Selection of Write Commands
Byte Definitions Byte Pos. #
Words
Start Word # Bytes Start Byte
Block Write Number 83 (Hex 53)
Reserved for future use
Enter Parameter Number
Reserved for future use
Enter Parameter Value
Reserved for future use (if selection is one
byte long)
Repeat for all Write commands desired*
FF (End)
*Note: Be sure not to go over the byte limit of the
server
LSB
MSB
LSB
MSB
LSB
MSB
1
1
1 or 2
0
1
1
1
1
1
1.2 or 4
0 or 1
1
0
1
1
Block Write Command Number 84: Select Read Summary Data
Byte Definitions Byte Pos. #
Words
Start Word # Bytes Start Byte
Block Write Number 84 (Hex 54)
Select Read Type
Block Read (defaults to block #35
Instrument Identification)
Selectable Read
Enter Block number (only one) or Selectable
parameter
number)* (Repeat for all
selected parameter number)
FF (End)
*Note: Be sure not to go over the byte limit of the
server
Value
0
1
1 0 1
1
0
1