KEYENCE EX-V Series - Manual (Page 42)

Chapter 3 Use of Common Functions
3
32
Reference 1: When the initial setting for a function is changed, the setting is
displayed in red.
Reference 2: To return to the common function selection mode without changing
the setting, press the
key.
Note 1: When you return to the measurement state by pressing the key even
after entering a function number or numeric value, the number or value is not
saved.
Note 2: The output is disabled for the time between entering the common function
selection mode with the
key and returning to the measurement state after
setting. However, if the output is already on before the sensor enters the common
function selection mode, the output is retained.