KEYENCE EX-V Series - Manual (Page 85)

Chapter 4 Use of Data Processing Functions
4
75
Select or set the desired measurement type in the following procedure:
Setting function "b"
1. Press the key for at least 2 seconds.
The sensor enters the common function selection mode.
2. Press the key to make function "b" flash.
3. Press the or key to select the measurement type.
4. Press the key to select the desired function number.
• Pressing the key changes the function number sequentially.
• Pressing the [ZERO] key resets the display to "b-0".
5. Press the key.
The sensor saves the setting and returns to the measurement state.