KEYENCE EX-V Series User Manual
Page 51
Chapter 3 Use of Common Functions
3
41
4. Use the
or
key to set the desired numeric value.
•
The value on the flashing digit can be changed.
Pressing the
key changes the flashing digit to the right.
•
Pressing the
key changes the value.
•
All digits flash when the fifth digit and sign can be changed.
Reference: Pressing the [ZERO] key in this step resets the display to "0000".
5. Press the
key.
The sensor saves the setting value and returns to the measurement state.
Reference: The offset value can be set within the range of
±19.999.
Note: When using the internal trigger function (
➮ page 46), adjust the trigger level
after entering the offset value. (The internal trigger function works with regard to
the displayed value.)
HIGH
TIM
GO
LOW
No setting
(5th digit)
(1st to 4th digits)