Kistler-Morse KM SVS2000 - Manual (Page 29)

25
www.kistlermorse.com
97-1129-01 Rev. D
TogglIng BeTWeen run Mode and FuncTIon Mode
After Quick Config is complete, the SvS2000 has two modes of operation:
run mode — monitoring Displays material weight or other indication of vessel contents
Function mode — menu Tree
Accesses the menu tree to allow the user to view and/or modify setup
parameters
Toggle between Function and run modes as described below:
• In run mode —
– Press the Func key to access the first item in the main menu, or
– Press the function number for a menu and then press the Enter Key to go directly to a particular menu.
• In Function mode, press the gross or net key while in any function in the menu tree to return to the
gross or net display in Run Mode.
FuncTIon Mode Menu Tree
The menu tree, is used to view and modify setup parameters and to troubleshoot the system. There are nine
numbered main headings in the menu tree:
Menu Description
Display set up display units, format, count by, and bar graph span
Cal calibrate the system
Setpoint
set up relay and digital output parameters, view digital output status, and test relays and digital
outputs
I-Output set up, adjust, and test current output
Com enter serial port configuration and PLC interface parameters
Sensor adjust excitation, resolution, and gain; and display raw, filtered, and output sensor data
Filter set up and monitor filtering functions to reduce the effect of ‘noise’
Tracking set up and monitor tracking functions to reduce the effect of ‘noise’ and drift
Service set up user access and keyboard lock codes, troubleshoot, and default the system
Each of the nine main headings has numbered submenus beneath it. Some of these submenus have additional,
unnumbered submenus beneath them.
Menu Tree navIgaTIon
menu tree navigation is simple:
• use the Func key to access the menu tree or use the function number and enter key to go to a particular
menu.
• use the Arrow keys to move among menus at the same level.
• use the enter key to select a menu and access its submenus.