Kistler-Morse KM SVS2000 - Manual (Page 66)

62
97-1129-01 Rev. D
www.kistlermorse.com
(Units are consistent with Disp Units.)
6. Use the numeric or Arrow Keys to input a value for DSP Step. Press the Enter Key to save the value in
memory. The display acknowledges the entry and returns to:
73 DSP STEP
7. Press the up Arrow key to proceed to the next menu. The display shows:
74 DSP QuALIFy
8. Press the enter key to access the DSP Qualify menu. The display looks like this:
> 3
9. Use the numeric or Arrow Keys to input a value. Press the Enter Key to save the value in memory. The
display acknowledges the entry and returns to:
74 DSP QuALIFy
10. Press the up Arrow key to proceed to the next menu. The display shows:
75 DSP FACTOR
11. Press the enter key to access the DSP Factor menu. The display looks like this:
> 100 %
12. Use the numeric or Arrow Keys to input a value. Press the Enter Key to save the value in memory. The
display acknowledges the entry and returns to:
75 DSP FACTOR
13. Press an Arrow Key to scroll to another menu or press the Gross or net Key to return to Run Mode.
79 dSp STep Mon (MonITor)
DSP Step Mon monitors the maximum variation in the raw weight while you are in the function. Follow this
procedure to view this display:
1. If the SVS2000 is in Run Mode, press the ‘7’ Key, ‘9’ Key, and Enter Key to access the menu tree. The
display shows:
79 DSP STEP MOn
2. Press the enter key to access this menu. The display looks like this:
> 0 lbs
(Units are consistent with Disp Units.)
The number on the display is the maximum difference in the raw weight since the last reset of the
monitor.
3. To reset the monitor to zero while remaining in the DSP Step Mon, press the Zero Key. The display
acknowledges the entry and shows:
> 0 lbs
(Units are consistent with Disp Units.)
4. Press the enter key to exit the monitor and return to:
79 DSP STEP MOn
5. Press an Arrow Key to scroll to another menu or press the Gross or net Key to return to Run Mode.