Kistler-Morse KM SVS2000 - Manual (Page 44)

40
97-1129-01 Rev. D
www.kistlermorse.com
22 Manual cal (calIBraTIon)
See Figure 9. For Manual Cal, you calculate and input directly Scale Factor Weight, Scale Factor Counts, and
Zero Counts for the calibration line. There are two reasons for performing a manual calibration:
• refining the calibration — you performed an Auto Cal. Later, you moved material into an empty vessel
and kept an accurate record of actual material weight (based on a truck weight or some other accurate
information) and indicated material weight (from the SVS2000). However, you did not perform an Auto
Cal at the time. you want to use this information now to refine the calibration.
• re-entering calibration data — you performed an Auto Cal and recorded the results (Scale Factor
Weight, Scale Factor Counts, and Zero Counts). Later you performed another Auto Cal to try to improve
accuracy, but an error was made. you want to re-enter the data from the previous calibration.
Figure 9. Manual Calibration
1. If the SVS2000 is in Run Mode, press the ‘2’ Key, ‘2’ Key, and Enter Key to access the menu tree. The
display shows:
22 mAnuAL CAL
2. Press the enter key to access this menu. The display shows:
SCALe FACTOr WgT
3. Press the enter key to access the Scale Factor Wgt menu. The display looks like this:
> 9999 lbs
(Units are consistent with Disp Units.)
4. Use the numeric or Arrow Keys to input a value for the scale factor weight. Press the Enter Key to save
the value in memory. The display acknowledges the entry and returns to:
SCALe FACTOr WgT
5. Press the up Arrow key to proceed to the next menu. The display shows:
SCALe FACTOr CTS
6. Press the enter key to access the Scale Factor Cts menu. The display looks like this:
> 250000 cnts
7. Use the numeric or Arrow Keys to input a value for the scale factor counts. Press the Enter Key to save
the value in memory. The display acknowledges the entry and returns to:
SCALe FACTOr CTS
8. Press the up Arrow key to proceed to the next menu. The display shows:
ZERO COUnTS