Kistler-Morse KM SVS2000 - Manual (Page 31)

27
www.kistlermorse.com
97-1129-01 Rev. D
KeyBoard
The SvS2000 keyboard is used to input setup parameters during Quick Config, access run mode display
screens, and access Function Mode menus to input setup parameters and troubleshoot.
The function of each key is described below.
Key Description
Func
used in run mode only. Press the Func key to switch to Function mode and access the first item
in the menu tree. note: To go directly to a particular menu in the menu tree while in run mode,
press the function number for the menu and then press the Enter Key
Arrow
• run mode — Press an Arrow key to scroll through the gross weight, net weight, total weight, and
relay status display screens.
• Function mode —
1.Press an Arrow Key to scroll through the menu selections at a given level.
2.Press an Arrow Key to scroll to a desired value when entering parameters. For example, when
setting Hi Span Cal, the Arrow Keys can be used to scroll to a desired value instead of entering the
number with the numeric Keys. Pressing the Up Arrow Key when the display shows the last menu
selection at a given level ‘rolls over’ the display to the first selection.
net
Change the display to net weight (weight added to or removed from the vessel since the last time
the Tare key was used):
• run mode — press the net key to go to the net weight display.
• Function mode — press the net key to exit the menu tree and go to the net weight display in run
Mode
Gross
Change the display to gross weight (total weight of material in vessel):
• run mode — press the gross key to go to the gross weight display.
• Function mode — press the gross key to exit the menu tree and go to the gross weight display in
Run Mode.