Adjustment of stitch length, Adjustment of differential feed ratio, How to arlji-isi – Kenmore 385.16677 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustment of Stitch Length
To select stitch length, turn the dial.
The larger the number, the longer the stitch.
The stitch length can be adjusted from 1 to 4 mm.
Position “R” is for rolled and narrow hemmings.
(T) stitch length dial
(D Setting mark
Adjustment of Differential Feed Ratio
The differential feed ratio can be altered by turning
the dial.
The number on the dial indicates the ratio between
the main and the sub feed motion.
:
1.0 indicates the neutral position. ...;.. ; ..; ;.
(X) Differential feed dial
(2) Setting mark
How
to arlji-iSi
If the sewn fabric is stretched, turn the dial
counterclockwise (fo'Ward 2.2).
If the sewn fabric is gathered, turn the dial
clockwise (toward 0.5).
(T) stretched
(2) Gathered
'Vs
w.
i
li
in —►
!'
1«
m
'« .......... '®
ff
s
i
'"(2)
____ B
16